Benvenuti alla "Worldstate Organization", una raccolta di idee a cui dovrebbe dare impulso
inventori, scienziati e politici e se nulla funziona spero che qualcuno abbia un'idea di successione.
Presento il mio progetto chiamato "Worldstate".
In un sistema monetario (elettronico) che non corrisponde al progresso economico il governo
crea denaro per pagare le aziende per prestazioni collettive, che devono dimostrare. Nessuna infalsificazione.
Con la separazione in denaro pubblico teoricamente illimitato per permettersi tutte le infrastrutture necessarie
soprattutto nel terzo mondo, l'energia rinnovabile (più veloce del Piano UE 2050) o il popolamento dello spazio e il denaro civile che include
Stipendio medio mensile di 5.000$-10.000$, indennità di disoccupazione 2.000$, assicurazione sanitaria, pensione/pensione...
(sistema sociale dell'Austria). Prezzi fissi.
Ciò accelererebbe lo sviluppo, ci darebbe il tempo di controllare e ridurre al minimo i problemi ambientali
povertà e criminalità. Gli stati manterrebbero la regolamentazione dei distretti e la democrazia il sistema politico. Parlamento mondiale.
Allora lavoreremo tutti insieme e saremo limitati solo dalle risorse; gestione delle risorse!
Nessuna pressione per avere successo. Chiunque potrebbe costruire qualcosa con 20 anni di duro lavoro.
È possibile far rispettare questi diritti attraverso i diritti umani, ad esempio il diritto a una retribuzione equa, il diritto a
Riduzione dell'inquinamento/carburante alternativo, diritto al miglior sistema per uno sviluppo rapido, diritto
Libertà dall’inflazione e dalla ricchezza attraverso la crescita economica effettiva; Frode per ricchezza, diritto all'equità
per il terzo mondo, diritto di colonizzare lo spazio;
Contraddizione: più soldi attraverso la crescita economica ma l’inflazione la distrugge, fissando il principio;
L'inflazione non nasce, tra l'altro, dal confronto con altre valute ed economie?
L'evoluzione del sistema si è sviluppata in questo modo ma non abbiamo più un altro sistema
Possibilità…tutti i progetti che adesso non possono essere finanziati ma che sono necessari. Ci costringe
questo sistema monetario ed economico non è compatibile, ad esempio, con una crescita economica continua;
dovremmo dominarlo!
Semplice ma buono.
Il sistema del debito dei paesi è migliore?! Debiti vecchi di 100 anni. Nessun paese può ripagarlo, pagando solo il tasso di interesse del debito!
Voglio sviluppare il terzo mondo fino al primo livello mondiale e realizzare progetti contemporaneamente senza persone provenienti dai paesi ricchi
spendendo i loro soldi per questo. Nessuna economia nazionale può permettersi questi progetti.
Voglio evitare la guerra fredda 2.0.
Il piano dell’organizzazione statale mondiale è quello di fondare un partito politico in ogni paese e di ottenerne uno
maggioranza democratica.
libros
Popolamento dello spazio (Space Populating) - Unitevi come umanità intergalattica
Il progetto Space Population è un sistema di acceleratori elettromagnetici che iniziano in
la luna; come il C.E.R.N. ma più grande e dritto per lanciarci ad alta velocità nell'universo.
acceleratore elettromagnetico come il CERN ma più grande e adatto alle astronavi
Cannone a rotaia elettromagnetico
Porta Lunare e Stazione
Un cannone elettromagnetico può accelerare un proiettile in 5 [metri] fino a circa 10000 [km/h]
diviso per 3,6 = 2780 [m/s].
v^2 = u^2 + 2as
dove a è l'accelerazione, v è la velocità finale, u è la velocità iniziale e s è lo spostamento. u = 0
a = v^2 / (2s)
a = 2780^2 [m/s] / (2 * 5 [m])
a ≈ 772 840 m/s^2
Ora possiamo utilizzare la stessa accelerazione per calcolare la velocità finale dell'astronave sulla luna.
Poiché la distanza percorsa è pari a 3 000 000 [m] (diametro della luna), possiamo utilizzare la seguente equazione:
v^2 = u^2 + 2as
Dato che la distanza percorsa è di 3.000.000 di metri, quindi:
v = √(2as)
v = √(2 * 772 840 * 3 000 000)
v ≈ 2 153 379 m/s = 7 752 163 [km/h]
Or scientist discovered a warp-bubble coincidentally!
Una fattoria di frutti di mare con la superficie dello stato di New York potrebbe nutrire il mondo intero.
Ocean Bottom Scraper, gigantesco allevamento di frutti di mare
Il Dr. Julius Hellenthal offre la terapia con cellule staminali embrionali dal tessuto del cordone ombelicale in combinazione con a
Vaccini autoimmuni e terapie antibiotiche a lungo termine con successo contro molte malattie o
forte sollievo dai sintomi.
Sclerosi multipla, epilessia, borreliosi di Lyme, morbo di Alzheimer, morbo di Chron, infarto, paralisi cerebrale, asma,
tutte le malattie legate ai reumatismi, malattie causate da batteri, senili
Maculopatia, distacco della retina, lupus eritematoso, impotenza, tutti i tipi di paralisi e malattie speciali
quelli dopo incidenti, malattie erpetiche come herpes labiale e herpes genitale, acufeni,
Tutti i tipi di tumori e soprattutto quelli del polmone, dello stomaco, della prostata, della pelle
(tasso di successo quasi del 100% per melanomi maligni dopo un trattamento appropriato), tumori delle labbra,
della lingua, caduta dei capelli, aritmie cardiache, attacchi di panico, miglioramento dell'intelligenza
bambini in età scolare, autismo, malattie legate al diabete, retinopatia diabetica,
Parkinson e molti altri ancora.
I read a book about shamanism and I don't know if it's true with the lightbody-dimension
but if I have headace I imagine a big sphere around my body which is deformed by any
impressions/influences. If I make the sphere smooth the headace goes away and the thoughts/brain
seem to bend. Please try it and give me feedback if it is just an illusion or real force!
carbonengineering.com
L'azienda ha inventato un processo per produrre un granulato dal biossido di carbonio
nell'aria e usarlo come combustibile.
Un impianto assorbe tanta CO2 quanto 40 milioni di alberi; ogni stazione di servizio riceve una struttura
produrre il combustibile in loco.
BoylesFlaskAdvanced (Domanda di brevetto: respinta)
Il Flask di Robert Boyle lavora con la birra finché l'acido carbonico non scompare. Il video su
youtube.com si chiama: “Boyle's flask works now”. Aggiungendo una ruota idraulica come generatore
e uno sparger per infiltrare anidride carbonica o bolle di gas o un serbatoio di acido carbonico
il ciclo viene mantenuto per guadagnare energia.
BoylesFlaskPerpetual
alberi
BiomechanicsTree
Capillare
In qualche modo il Sequoyah albero nel Nord America può trasportare l'acqua a oltre 100 metri di altezza
dovrebbe esserci la possibilità di utilizzare questo meccanismo per ottenere energia.
h = altezza di salita; σ = tensione superficiale; θ = angolo di contatto;
ϱ = densità; g = accelerazione gravitazionale. r = diametro.
Capillary Waterwheel
YCapillary fills untill both upper ends
SchremsCapillary (Domanda di brevetto: respinta)
Schrems-Capillary: dovrebbe riempirsi completamente, ma un prototipo con misure: k = 3 cm;
L = 1 m; d1 = 0,8mm; d2 = 0,4mm; d3 = 0,02mm non ha funzionato. Si è riempito da solo ma la pressione in d2
era troppo basso quindi non ha deviato lì.
Capillare della valvola (Domanda di brevetto: respinta)
Il capillare della valvola aspira il liquido secondo l'effetto capillare del diametro della
Altezza di salita dipendente dai capillari (2) per cui la valvola/membrana (3)
è chiuso. La valvola/membrana deve essere progettata in modo tale da superare l'effetto capillare
Un capillare si riempie solo fino ad una certa altezza nonostante la colonna montante sia maggiore della lunghezza del tubo
sotto l'apertura superiore o un'apertura laterale. Successivamente si apre la valvola/membrana (3).
per scaricare il liquido ad un livello più alto alla pressione di gravità P. Poi chiude
la valvola/membrana (3) e il nuovo liquido vengono aspirati per effetto capillare….
WettingCapillary (Domanda di brevetto: respinta)
Il capillare bagnante (1) aspira l'acqua fino all'altezza h (2), che dipende dal diametro, e nella parte superiore è curvato verso il basso. Lo schermo bagnante (3) è più sottile in punta rispetto al capillare e l'angolo di contatto è molto piccolo, il che significa che il liquido trabocca e gocciola sul fondo dello schermo.
Con trattamento superficiale
La bagnabilità può essere aumentata, ad esempio con plasma o altri metodi.
Un'azienda di soffiatura del vetro mi produce il capillare e lo schermo bagnante... .
L'azienda di soffiatura del vetro non l'ha prodotto bene. I capillari sono ben fatti ma il
WettingScreen è troppo grande, non entra nel capillare e non è aperto all'estremità superiore.
Ho provato a mescolare l'esperimento
con la salvietta di carta ma ancora non cade/devia.
I fisici professionisti dovrebbero farlo! I professionisti potrebbero farlo funzionare.
Se ora utilizzi la bagnatura capillare con il metodo del video: "Azione capillare nelle piante
sperimentare con la salvietta di carta" combinata, è logico che il capillare possa essere deviato a un livello più alto con la salvietta di carta bagnandola,
effetto capillare e gravità contro la forza di ritenuta del capillare perché il
il passaggio dell'acqua da un bicchiere all'altro è più difficile di così.
Wetting capillary experiment:
Comprai dei tubi di vetro che scaldai sulla fiamma e da cui attingevo
il capillare, è stato difficile e mi ci sono voluti molti tentativi.
Inizialmente la carta assorbente arrivava sotto il livello del vetro e gocciolava.
Quando ho accorciato la carta assorbente fino al livello dell'acqua, il capillare si è riempito,
la carta assorbente si è bagnata/si è bagnata completamente ma non ha gocciolato.
Quasi successo! I professori possono fare questa corsa!
Le piante crescono anche all'ombra o al buio, quindi la traspirazione e
la pressione negativa non è l'unica forza per cui possono fornire acqua alle loro foglie.
Gli alberi hanno un segreto che deve essere svelato.
UpliftLift (Domanda di brevetto: respinta)
UpliftLift
Masse più leggere dell'acqua si infiltrano nella colonna d'acqua e si muovono attraverso di essa
sollevamento idrostatico verso l'alto. All'estremità superiore le masse vengono sollevate dall'ascensore e
montati sull'ascensore, cadono verso il basso per mantenere l'ascensore in movimento per generare energia.
Il sollevatore può anche essere azionato con olio al posto delle masse ed eseguire l'infiltrazione
con un ugello.
Le mie domande di brevetto vanno nella direzione del movimento perpetuo e cosciente
Taccio sulla produzione di energia o elettricità perché altrimenti
Si verifica un rifiuto al 100%.
Tuttavia, in base alla mia convinzione, sono dell'opinione che...
Ciclo di Carnot, leggi di conservazione dell'energia e dimostrazione dell'impossibilità di uno
Mobili perpetuum, cioè efficienza inferiore o uguale a 1 SOLO per
si applicano macchine termodinamiche come i motori e c'è una scappatoia.
Per accelerare un essere umano a 6G fino alla metà della velocità della luce sono necessari 29 giorni o 2527232 secondi di accelerazione.
t = (c/2)/a = (149896229[m/s]) / 59[m/s^2] = 2527232 secondi
L'energia totale necessaria per accelerare un'astronave di 1000 kg fino alla metà della velocità della luce a 6G
è approssimativamente:
L = F * d
F = 1000 [kg] * 59,28 [m/s^2]
F = 59280 [N]
d = (1/2) * a * t^2
d = (1/2) * 59 [m/s^2] * (2527232 [s])^2
d = 2 * 10^14 [metri]
L = F * d
L = 59280 [N] * 2 * 10^14 [m]
W = 1*10^19 [joule]
Per determinare la quantità di energia che un singolo reattore Tokamak ITER può produrre in 29 giorni,
dobbiamo convertire 29 giorni in secondi, ovvero 2527232 secondi.
L’energia prodotta da un singolo reattore Tokamak ITER con una potenza di 1,5 GW in 29 giorni è:
Pertanto, sarebbero necessari circa 2500 reattori Tokamak ITER, ciascuno dei quali produrrebbe 1,5 GW di potenza.
funzionando ininterrottamente per 29 giorni per generare l'energia necessaria per accelerare un'astronave di 1000 kg
a metà della velocità della luce a 6G.
Spara le sfere di ferro in diagonale verso l'alto verso il soffitto della camera in modo che le
le palline che cadono possono essere riciclate.
Utilizzo l'accelerazione elettromagnetica con le sfere al centro di una forma ad anello
acceleratore elettromagnetico, cioè al centro di un cilindro cavo o di una bobina
avere un rinculo nullo o minimo.
In nessun caso con un fucile a rotaia, poiché il rinculo è eccessivo.
Conservazione della quantità di moto:
m_1*v_1 + m_2*v_2 = m_1*v_1' + m_2*v_2'
Δv è la differenza di velocità dell'impulso sul coperchio rispetto all'impulso sul fondo
γ peso specifico in N/m³ = kg/(m²s²)
PallaElettromagneticaAccelerazioneLandspeeder
Acceleratore elettromagneticoLandspeeder
Un motore genera l'energia per l'accelerazione elettromagnetica.
Verranno create diverse camere acceleratrici elettromagnetiche con sfere di ferro
combinati per creare un carico come uno skateboard o un'auto
galleggiare o volare.
Pistola a spirale
v_fine = ((2*V* μ_0*χ_m*n²*I²)/m)^1/2
m è la massa del proiettile
V è il volume del proiettile
χ_m è la suscettività magnetica
μ_0 è la permeabilità al vuoto 4π × 10−7 V*s/(A*m)
La corrente è in ampere
n è il numero di spire per unità di lunghezza della bobina, ottenuto dividendo il
I giri totali della bobina possono essere determinati dalla lunghezza totale della bobina in metri
Pistola a bobina di potenza:
F = (0,5 * B^2 * A * n * l * I^2) / d
B è l'intensità del campo magnetico all'interno della pistola a bobina (Tesla)
A è l'area della sezione trasversale della bobina (metri quadrati)
n è il numero di spire della bobina
l è la lunghezza della bobina (metri)
I è la corrente che scorre attraverso la bobina (ampere)
d è la distanza su cui viene applicata la forza (metri)
Turbina di fluttuazione quantistica (domanda di brevetto: respinto)
Utilizzo laser da 200 kW, rilevatori e specchi statici in silicio a riflessione completa
al posto delle pale della turbina
e la turbina viene ruotata a causa della fluttuazione quantistica, del rumore quantistico
e la pressione di radiazione.
p_st o pressione leggera è la pressione che agisce su una superficie a causa della radiazione elettromagnetica assorbita, emessa o riflessa.
Durante l'assorbimento e l'emissione, la pressione della radiazione è uguale all'intensità I dell'onda divisa per la velocità della luce c:
p_st = I/c con le unità p_st = N/m² = J/m³ = Pa (Pascal);
con la riflessione completa la pressione della radiazione è doppia rispetto a quella con l'assorbimento completo.
Un fotone di frequenza ν trasporta l'energia:
E = h * ν (vedi effetto fotoelettrico)
con la costante di Planck h.
A causa della relazione energia-impulso
E = (p²*c² + m²*c4)^1/2
Al fotone di massa m = 0 segue un impulso p di grandezza:
| p | = h*ν/c
Modello d'onda:
La pressione che un campo di radiazione nel vuoto esercita su una superficie può essere determinata da:
Esprimere il tensore dello stress di Maxwell (T i j). Con superficie assorbente
Vettore normale n, la pressione di radiazione è data da:
p_st*nj = ∑ Tij*ni
I componenti del tensore dello stress di Maxwell possono essere derivati dall'elettricità
Calcolare l'intensità del campo E e la densità del flusso magnetico B:
dove δij è il delta di Kronecker, ε_0 è la costante del campo elettrico e μ_0 è
la costante del campo magnetico è
Rumore quantistico
è creato dalla quantizzazione della radiazione elettromagnetica e ha uno spettro
Densità di potenza di hf. Per lunghezze d'onda ≤ 10 μm predomina il rumore termico.
I ricevitori ottici nel campo visibile richiedono quindi potenze di segnale notevolmente più elevate
che nella gamma delle frequenze elettroniche.
Ciò si verifica quando atomi o particelle subatomiche (elettroni, fotoni o...
particelle ancora più piccole) sono coinvolte in una transizione di livello energetico (“salto quantico”).
I valori misurati corrispondenti (e quindi i risultati dei calcoli) sono soggetti a uno
La distribuzione di probabilità e sono matematicamente e probabilisticamente corrette, nel
Tuttavia, nella pratica computazionale è spesso insoddisfacente o addirittura inutilizzabile.
Ad oggi non esiste una formulazione della forza esercitata dalle fluttuazioni quantistiche
I use 200kW lasers, detectors and silicium-mirrors which are static and completely reflecting instead of the
turbine-leaves and it will rotate
because of the quantum-fluctuations, quantum noise and the radiation pressure.
p_st or light pressure is the pressure exerted on a surface by absorbed, emitted or reflected
electromagnetic radiation.
For absorption and emission, the radiation pressure is equal to the intensity I of the wave
divided by the speed of light c:
p_st = I/c with the units p_st = N/m² = J/m³ = Pa (Pascal);
In the case of complete reflection, the radiation pressure is twice as great as in the case
of complete absorption.
A photon of frequency ν transports the energy:
E = h * ν (see Photoelectric Effect)
with the Planck constant h.
Because of the energy-momentum relation
E = (p²*c² + m²*c4)^1/2
for the photon with a mass m = 0 follows a momentum p with the magnitude:
| p | = h*ν /c
Wave model:
The pressure exerted on a surface by a radiation field in a vacuum can be expressed by the
Maxwell's stress tensor ( T i j ). With an absorbing surface
Normal vector n is the radiation pressure given by:
p_st*nj = ∑ Tij* ni
The components of Maxwell's stress tensor can be derived from the electrical
Calculate the field strength E and the magnetic flux density B:
where δij is the Kronecker delta, ε_0 the electric field constant and μ_0 the
magnetic field constant is.
Quantum Noise
arises from the quantization of electromagnetic radiation and has a spectral
power density of hf. For wavelengths ≤ 10 μm, thermal noise predominates.
Optical receivers in the visible range therefore require significantly higher signal power
than in the range of electronic frequencies.
This occurs when atoms or subatomic particles (electrons, photons or
even smaller particles) are involved in an energetic level transition (“quantum jump”).
Corresponding measured values (and thus calculation results) are subject to a
Probability distribution and are mathematically-probabilistically correct, in the
computational practice but often unsatisfactory to unusable.
There is as yet no formulation of the force exerted by quantum fluctuations
A technical diagram showing a device designed to harness Zero-Point Energy
1. Quantum Vacuum Chamber:
• Shape: A cylindrical or spherical object that represents the central part of the generator.
• Sizing: For example 1 meter diameter for a spherical chamber.
• Material: Choose a solid material such as metal or a hypothetical material suitable for vacuum printing.
• Position: Place centrally throughout the assembly.
Caption: Quantum Vacuum Chamber – captures vacuum energy fluctuations.
2. Electromagnetic Coils:
• Shape: Multiple annular or cylindrical coils around the vacuum chamber.
• Sizing: Each coil ring could have a smaller diameter than the chamber, for example 0.8 meters.
• Material: Copper or similar conductive material.
• Quantity: Draw several layers of coils wrapped around the chamber.
Caption: High-Frequency Electromagnetic Coils – amplify quantum energy fluctuations.
3. Energy Collectors and Converters:
• Shape: Small rectangular plates or cylinders placed along the coils.
• Function: They collect the energy amplified by the coils and convert it into electricity.
• Position: Draw them at strategic locations along the coils, perhaps at the nodes or connections of the coils.
Caption: Energy Collectors – convert amplified fluctuations into electricity.
4. Cooling System:
• Shape: Cooling fins or tubes fitted around the generator, particularly around the electromagnetic coils.
• Function: Keeps the system at a low temperature to ensure maximum efficiency.
• Sizing: Draw along the outer frame of the assembly, perhaps as a network of hoses or cooling fins.
Label: Cooling System – maintains low temperatures for optimal efficiency.
5. Supercapacitor Array:
• Shape: Several rectangular or cylindrical modules responsible for energy storage.
• Sizing: Place them in a row or array to the side of the vacuum chamber.
• Location: Directly next to or below the main system, connected to the energy collectors.
Caption: Supercapacitors – store collected energy.
6. Power Output Terminals:
• Shape: Smaller cylindrical or rectangular ports located on the outside of the system.
• Function: Provide the connection for external power delivery.
• Position: At the bottom or side of the device.
A CAD design of a zero-point energy generator.
1. Vacuum chamber
• Description: A hermetically sealed room in which a near-perfect vacuum is created.
• Function: Shields external particles and energy sources to create an optimal environment for extraction
of zero-point energy. This chamber minimizes outside interference, thereby reducing the
Zero point fluctuations in the vacuum can be used more effectively.
2. Quantum field coils
• Description: Highly sensitive coils arranged in a special pattern.
• Function: These coils interact with the fluctuating quantum fields in the vacuum.
They are designed to extract the energy from these fluctuations and convert it into usable
convert electrical energy.
3. Energy extraction plates
• Description: Flat, conductive plates arranged near the quantum field coils.
• Function: They collect and direct the energy generated by the quantum field coils
the generator's energy management system. These plates are crucial for efficient
Transfer of energy.
4. Control circuits
• Description: A network of high-performance circuits and microprocessors.
• Function: These circuits monitor and control energy extraction. You adjust the parameters of the
Quantum field coils dynamically adjust to maximize energy production and keep the generator stable.
They also ensure that the energy generated is routed safely and evenly to the output system
becomes.
5. Energy output interface
• Description: A connector device connected to the energy extraction plates.
• Function: It enables the electrical energy generated to be consumed. The interface is
standardized to enable integration into various power grids and energy storage systems.
It also contains safety elements to prevent overvoltage or short circuit.
6. Stabilization module
• Description: A separate area in the generator equipped with advanced electronics.
• Function: It regulates the energy flows within the generator to compensate for fluctuations and a
to ensure uniform energy delivery. The module prevents resonance phenomena and protects against possible ones
unstable states of the quantum field.
7. Cooling and insulation system
• Description: An integrated system consisting of cooling fins, fans or a liquid cooling system.
• Function: Maintains the generator temperature within optimal operating ranges to ensure efficient
to ensure function. It protects sensitive components from overheating and reduces energy losses
through heat radiation.
How the generator works
The Zero Point Energy Generator works by exploiting the quantum fluctuations in the vacuum.
Due to their special arrangement, the quantum field coils create a field that corresponds to these fluctuations
interacts and extracts energy. This energy is collected via the energy extraction plates and
stabilized by the control circuits. The energy is then sent to the energy output interface
forwarded, from where it can be used for practical applications.
A detailed drawing of a quantum field coil with labeled components.
1. Superconducting coil
• Description: A winding system made of superconducting material that has extremely low resistance.
• Function: Generates a strong magnetic field necessary for interaction with quantum fluctuations
is. Thanks to superconductivity, the coil can carry high currents without loss of energy, which is crucial for the
efficient use of quantum phenomena.
2. Magnetic flux stabilizers
• Description: A system of magnets or ferromagnetic materials arranged around the superconducting coil.
• Function: Stabilizes the generated magnetic field and controls the flow direction. This creates a
creates a uniform and controlled field that effectively focuses the quantum fluctuations and the
Energy extraction optimized.
3. Quantum resonance chamber
• Description: A cavity surrounding the superconducting coil and made of highly reflective material.
• Function: Amplifies the quantum fluctuations in the area of the coil by causing them to resonate with the natural ones
Vacuum fluctuations occur. The resonance chamber focuses the energy onto the coil, increasing efficiency
energy production is increased.
4. Control circuit interface
• Description: An electronic circuit connected to the coil and stabilizers.
• Function: Monitors and regulates the operating parameters of the quantum field coil. It adjusts the current flow
and the magnetic fields to optimize the resonance conditions and maximize energy yield
achieve. The interface also allows adaptation to different operating modes and conditions.
5. Energy output terminals
• Description: Electrical connections connected to the coil.
• Function: Transfer the energy gained from the coil to the external energy system. These terminals
are designed to transmit the energy gained with minimal loss and at the same time
protect against possible feedback effects.
6. Cooling and insulation system
• Description: A system of cooling fins or liquid cooling tubes arranged around the superconducting coil and the quantum resonance chamber.
• Function: Keeps the superconducting coil at a low temperature to maintain the superconducting state
to maintain. At the same time, it thermally insulates the system to minimize external heat influences
and to ensure the stability of the magnetic field.
7. Vibration damper
• Description: Shock-absorbing materials or structures attached to the coil attachment points.
• Function: Reduce mechanical vibrations, which affect the stability of the magnetic field and therefore efficiency
could affect energy extraction. They ensure that the coil is in an optimal position
remains and works undisturbed.
How the quantum field coil works
The quantum field coil works by generating a controlled magnetic field that interacts with the vacuum fluctuations. The superconducting coil creates a strong magnetic field, while the magnetic flux stabilizers focus and stabilize this field. In the quantum resonance chamber, the quantum fluctuations are amplified, transferring more energy into the coil.
The control circuit interface monitors the conditions within the coil and adjusts the parameters in real time to ensure optimal energy harvesting. The cooling and insulation system keeps the coil at the necessary low temperature to maintain the superconducting state and minimize energy losses.
The energy obtained is then transferred via the energy output terminals to an external system, where it can be used for various applications. The vibration dampers ensure that the system remains mechanically stable, thus ensuring the integrity of the magnetic field and energy extraction.
A detailed technical diagram of Nikola Tesla's Wardenclyffe Tower
A generator designed to harness energy from the pulsating Earth's magnetic field
1. Induction coil
2. Magnetic field
3. Energy conversion unit
4. Capacitor bank
5. Connections
6. Grounding
7. Measuring instruments
8. Current meter
9. Voltmeter
10. Capacitor
A generator designed to harness energy from the pulsating Earth's magnetic field
1. Coil
2. Magnetic field lines
3. Capacitor
4. Connections
5. Grounding
6. Current meter
7. Voltage meter
energetic torus that uses the pulsating magnetic field of earth to produce energy with induction...
Adam Trombly Generator
Diagram of the Adam Trombly generator
1. Rotor with magnets
• Description: The rotor is a central, rotating component of the generator. It consists of a cylindrical or disk-shaped body equipped with permanent magnets. These magnets are evenly distributed on the surface of the rotor.
• Function: When the rotor rotates, the magnets create a changing magnetic field that leads to induction
electrical energy in the coils of the stator.
2. Stator
• Description: The stator surrounds the rotor and is equipped with copper coils around an iron core. These coils are often configured as windings that use the rotor's changing magnetic field to generate an electrical voltage.
• Function: The stator absorbs the changing magnetic field of the rotating rotor and induces electrical energy
Current in the copper coils.
3. Copper coils (induction coils)
• Description: Copper coils are coils of copper wire wrapped around the stator. Copper is a common material for such applications due to its high conductivity.
• Function: The movement of the rotor creates a magnetic field in the coils, which creates an electrical
Allows current to flow through electromagnetic induction.
4. Capacitor bank
• Description: The capacitor bank consists of a series of capacitors connected in series or parallel to store the electrical energy generated by the copper coils.
• Function: The capacitors temporarily store electrical energy and smooth out voltage fluctuations
and provide energy when the generator begins to fluctuate.
5. Frequency converter (frequency converter)
• Description: The frequency converter is an electronic component that adjusts the frequency of the alternating voltage generated by the coils.
• Function: It converts the electrical energy produced by the generator into a usable frequency, whichever
must be adjusted according to application (e.g. 50 Hz or 60 Hz).
6. Flywheel
• Description: A flywheel is a solid, often metallic, disk or cylinder attached to the axis of the rotor.
• Function: The flywheel stores kinetic energy and ensures that the rotor rotates
remains even. It stabilizes the operation of the generator by reducing fluctuations in the
Rotation speed reduced.
7. Bearing and axle
• Description: The bearings and axle are mechanical components that allow the rotor to rotate with as little friction as possible.
• Function: The bearings support rotational movement and minimize mechanical energy loss
Friction. They ensure that the rotor can rotate smoothly and stably.
8. Frame structure
• Description: The generator frame is the outer casing that holds all of the internal components (rotor, stator, flywheel, bearings, etc.) together. It is often made of aluminum or steel to ensure robustness and stability.
• Function: The frame protects the internal components and ensures that the generator is structurally stable
remains and mechanical vibrations are minimized.
9. Control electronics
• Description: The control electronics is a set of electronic components that monitor and control the operation of the generator.
• Function: It regulates the energy flow, monitors the output voltage and current, and ensures
that the generator works efficiently, without unstable fluctuations in energy production.
Summary of how it works:
The Adam Trombley Generator uses the motion of a rotating magnetic rotor within a stationary one
Stator, which is equipped with copper coils. The rotation of the rotor creates the magnets
changing magnetic field that induces an electric current in the copper coils. This current is supplied by a
Capacitor bank stored and regulated by a frequency converter. A flywheel ensures stability,
by storing kinetic energy, and the control electronics monitors the entire functioning of the system.
TorusDynamo1 Adam Trombly
TorusDynamo2 Adam Trombly
AdamTromblyPulsatingTorus
A conceptual CAD drawing of a free energy generator inspired by speculative energy concepts by Adam Trombly
1. Rotor
• Description: The rotor is the heart of the generator and consists of a rotating cylinder or disk. Permanent magnets are attached to the surface of the rotor and are evenly distributed. The rotor itself is mounted in a stable bearing so that it can rotate with as little resistance as possible.
• Function: The rotor rotates continuously and ensures that the attached magnets move in relation to the surrounding copper coils. This movement creates a changing magnetic field, which is the prerequisite for the generation of electrical energy through electromagnetic induction. The rotation of the rotor can be caused by external forces such as a motor, but in this case speculatively by interaction with the Earth's magnetic field.
2. Magnets on the rotor
• Description: The permanent magnets are firmly attached to the surface of the rotor. These magnets are aligned to project the maximum magnetic field into the area of the coils.
• Function: As the rotor rotates, the magnets move past the copper coils. This movement creates a dynamic magnetic field that cuts through the coils and induces a voltage in them. The crucial mechanism is the continuous change in the magnetic field caused by the rotation of the magnets.
3. Coils (copper windings)
• Description: The coils consist of many turns of copper wire wound around an iron core or evacuated form. Copper is preferred due to its excellent conductivity and low electrical losses.
• Function: The copper coils are where the actual energy generation takes place. As the magnets on the rotor move past the coils, they create a changing magnetic field that cuts through the coils' turns and creates a voltage. This principle is called electromagnetic induction and is the same as that used in conventional generators. The faster the magnets rotate or the stronger the magnetic field, the more voltage is generated in the coils.
4. Capacitor bank
• Description: The capacitor bank consists of several capacitors connected in series or parallel to store the electrical energy generated. Capacitors are passive electronic components that can store electrical charge and release it again when necessary.
• Function: The capacitor bank plays a key role in stabilizing the power generated. When power generation is irregular - for example due to fluctuations in rotor rotation - capacitors can buffer the energy and deliver it to consumers at a constant voltage and current. They act like a temporary battery that absorbs voltage spikes and keeps the system stable.
5. Bearing
• Description: Bearings consist of mechanical components that allow the rotor to rotate with little friction. They are often lubricated or made from materials specifically designed for long life and minimal friction.
• Function: The bearings keep the rotor stable and ensure that it can rotate with minimal energy loss. They minimize mechanical friction that could otherwise cause the rotor to slow down or even stop. Ideally, the bearings must be extremely durable and low-maintenance to ensure the smoothest possible rotation.
6. Flywheel
• Description: The flywheel is a large, usually heavy disk or cylinder that is attached to the axis of rotation of the rotor. It is often made of metal and has a high mass.
• Function: The flywheel stores kinetic energy in the form of rotational motion. Once set in motion, it ensures that the rotor continues to run smoothly, even if there are slight fluctuations in torque. The flywheel helps smooth the energy output and ensures continuous power production by stabilizing the rotation. This is particularly useful when the rotor is subjected to irregular driving forces.
7. Frame structure
• Description: The frame structure is the mechanical framework of the generator that holds all components together. It is usually made of a sturdy material such as steel or aluminum and provides space for the rotor, coils, bearings and electronics.
• Function: The frame keeps the generator stable and ensures that all components stay securely in place. In addition, the frame protects the generator from external influences such as vibrations or physical shocks. It also minimizes mechanical deformation that could arise from operation and helps dampen vibrations and noise.
8. Earth's magnetic field
• Description: The Earth's magnetic field is a natural, invisible magnetic field created by the movement of liquid iron in the Earth's outer core. It permeates the entire planet and varies in strength depending on location.
• The drawing shows lines that represent the Earth's magnetic field interacting with the rotor. This natural magnetic field is the source from which energy is derived.
• Function: In this speculative theory, the Earth's magnetic field could interact directly with the generator's magnet and rotor. The idea is that by properly aligning and moving the rotor, the Earth's magnetic field can be used to power the generator or provide additional energy. This could theoretically occur through the interaction of the rotor's permanent magnets with the Earth's magnetic field to amplify or modulate the magnetic field and thereby generate additional energy.
9. Control electronics (optional)
• Description: The control electronics include components such as voltage regulators, frequency converters and circuits that monitor and control the operation of the generator.
• Function: These components regulate the voltage and current that the generator produces and adjust the frequency of the alternating current produced to make it suitable for various applications. The electronics ensure that the energy supply remains stable and that no harmful voltage fluctuations occur.
Working principle of earth magnetic field generator:
The generator's rotor is caused to rotate by external forces or by interactions with the earth's magnetic field. The attached magnets create a changing magnetic field that flows through the copper coils on the stator, thereby generating electrical current. This current is stored in the capacitor bank and regulated by the control electronics to provide stable and usable electrical energy.
A flywheel helps keep the rotational motion smooth, while the bearings and frame ensure the rotor works smoothly and efficiently. The Earth's magnetic field could theoretically help strengthen or maintain the magnetic field in the generator.
ManualHandFanCasimirEffect (Domanda di brevetto: respinta)
Ventilatore manuale effetto Casimir:
Meccanica di un ventilatore manuale (3) con molla di ritorno (4), leva di azionamento (1) e trasmissione della potenza ad ingranaggi (2)
composto da pannelli effetto Casimir (1), ventaglio manuale (2) con
Molle di ritorno (5), forza Casimir (3) e campi/fluttuazioni quantistiche in diverse lunghezze d'onda (4)
Il ventaglio manuale crea l'effetto Casimir esercitando ripetutamente una pressione su di te
Energia di rotazione della leva attraverso un meccanismo ad ingranaggi e
viene riportato nella posizione iniziale della leva tramite una molla o un anello di gomma.
Lyrics:
Der letzte Eintrag – Kriegstagebuch – mentaler Winter
Ein grauer Schleier bedeckt wie ein Leichentuch den Himmel
Die Stille ist unfassbar laut – zerreißt mein Gehör
Ich hör' nichts mehr, doch ich gehör' hierher
Gehör' in dieses Kriegsgebiet, in dem es keinen Frieden gibt
Bin kein Feigling, der klein beigibt – bei jeder Krise flieht
Auch wenn mich manchmal schon der Mut verlässt, die Wut – sie lässt
Mich an Tagen das Leid ertragen – das Blut, den Stress
Es lagen Stacheldrahtspiralen in meinem Vorgarten
Wusste nicht, was sie vorhatten, wusste nicht, was sie planten, doch
Durch Überlebenswillen – so weit die Füße mich tragen
Es hilft kein Beten, wenn Teufel und Realität vereint zuschlagen
Sie haben massenhaft Waffen – pures Gift in den Adern
Herzen, die taktlos schlagen, Nerven aus stahlharten Fasern
Doch ich wollte nicht kampflos weichen, ich wollte nicht schweigen
Scheiß auf Orden für's Morden – man zwang mich, mich zu verteidigen
Es ist Krieg – Menschen leiden und sterben voll Schmerz
Keiner siegt – ein Leben ist nichts mehr wert
Im Krieg sind die Köpfe der Krisenherd
Die Macht macht Krieg – die Menschen vieles verkehrt
=The last entry - war diary - mental winter
A gray veil covers the sky like a shroud
The silence is incredibly loud - it tears apart my hearing
I don't hear anything anymore, but I belong here
Belong in this war zone where there is no peace
I'm not a coward who gives in - flees every crisis
Even if sometimes my courage leaves me, my anger leaves me
There were days when I endured the suffering – the blood, the stress
There were coils of barbed wire in my front yard
Didn't know what they were up to, didn't know what they were planning, but
Through the will to survive – as far as my feet can take me
Praying doesn't help when the devil and reality strike together
They have tons of weapons - pure poison in their veins
Hearts that beat without rhythm, nerves made of steel-hard fibers
But I didn't want to give up without a fight, I didn't want to remain silent
Screw medals for killing - I was forced to defend myself
It's war - people suffer and die in pain
Nobody wins - a life is no longer worth anything
In war, heads are the source of trouble
Power makes war - people do a lot of things wrong
Ich bin ein denkender Kämpfer – sie sind zu lenkende Henker
Sie brachten ihren Krieg zu mir – brennende Felder – rennende Männer
Sie brachten Tod, Gewalt, Not, Leid, Verderben
Verminten uns unsere Erde, nahmen uns Eltern und Erben
Anfangs kamen sie nachts im Schutz der Schatten – der Stille
Strategische Landungen in Gruppen, unter dem Deckmantel der Hilfe
Jetzt läuft ihr Wahnsinn live im Fernsehen, Propaganda in jeder Silbe
Sie verzerren die Wahrheit nur durch wenige Bilder
Denn auch sie bringen Bomben und scheißen auf unsere Kultur
Zerstören unsere Häuser, spucken uns auf die Schuhe
Wollen uns sagen, was Recht und was Unrecht ist
Was gut, was schlecht ist
Waffen machen klar, wer hier jetzt Chef ist
Trotzdem leiste ich Widerstand, bleib' ich – schieße dann
Wenn es heißt "Achtung, Achtung – Feind und Fliegeralarm"
Denn ich will was meins ist behalten und diese Krieger haben
Keinen Respekt vor unserem Leben, deshalb lieg' ich im Schützengraben
Es ist Krieg – Menschen leiden und sterben voll Schmerz
Keiner siegt – ein Leben ist nichts mehr wert
Im Krieg sind die Köpfe der Krisenherd
Die Macht macht Krieg – die Menschen vieles verkehrt
=
I am a thinking fighter - they are executioners to be directed
They brought their war to me - burning fields - running men
They brought death, violence, hardship, suffering, ruin
Mined our earth, took away our parents and heirs
At first they came at night under the cover of shadows - silence
Strategic landings in groups, under the guise of aid
Now their madness is playing live on television, propaganda in every syllable
They only distort the truth with a few images
Because they too bring bombs and shit on our culture
Destroy our houses, spit on our shoes
Want to tell us what is right and what is wrong
What's good, what's bad
Weapons make it clear who is boss here now
Nevertheless, I resist, I stay - then shoot
When it says “Attention, attention – enemy and air raid alarm”
Because I want to keep what is mine and have these warriors
No respect for our lives, that's why I'm in the trenches
See upcoming rap shows
It's war - people suffer and die in pain
Nobody wins - a life is no longer worth anything
In war, heads are the source of trouble
Power makes war - people do a lot of things wrong
Ich war nie sonderlich politisch ambitioniert
Ich hab nie öffentlich gegen irgendwas demonstriert
Bin kein Fanatiker, kein Attentäter, kein Terrorist
Bin eins von den zivilen Opfern, die man leider oft vergisst
Gewalt erzeugt Gegengewalt – ich bin gegen Gewalt
Doch um meine Liebe zu schützen habe ich keine andere Wahl
Wo sollt' ich hin?
Meine Familie und Freunde sind alle hier
Durch das, was gerade passiert, könnte ich alle verlieren
Also bleibe ich hier – verzweifle hier
Und wenn mein Schicksal es verlangt von mir, dann fall ich hier
Jetzt muss ich zusehen, wie sie uns unser Leben nehmen
Unsere Werte, Wünsche, Visionen verstümmeln, mit Füßen treten
Lobbyisten und Wirtschaftsbosse wollen nicht stoppen
Wir zahlen den Preis – färben die Erde mit roten Tropfen
Was mir nicht in den Kopf will: Wofür gibt's Diplomatie?
Wofür bezahl ich?
Gehe ich wählen?
Was ist Politik?
Kein Ziel rechtfertigt einen Krieg!
Habt ihr kapiert, dass mir Frieden am Herzen liegt?
Doch unser Handel wird boykottiert – jetzt hungern wir
Das nennt die Welt zivilisiert – wie arm seid ihr?
=
I was never particularly politically ambitious
I have never publicly demonstrated against anything
I'm not a fanatic, not an assassin, not a terrorist
I'm one of those civilian victims who are unfortunately often forgotten
Violence breeds counter-violence - I am against violence
But to protect my love I have no other choice
Where should I go?
My family and friends are all here
I could lose everyone because of what's happening right now
So I stay here – despair here
And if my fate demands it of me, then I will fall here
Now I have to watch as they take our lives
Mutilating and trampling on our values, desires, visions
Lobbyists and business bosses don't want to stop
We pay the price – staining the earth with red drops
What doesn't come to mind: What is diplomacy for?
What am I paying for?
Do I vote?
What is politics?
No goal justifies a war!
Do you understand that I care about peace?
But our trade is being boycotted - now we are starving
That's what the world calls civilized - how poor are you?
AmbienteSistemaScienzaSeminarioLavoroCiclo CO2
Progresso tecnologico (combustione ottimizzata, marmitta catalitica, iniezione diretta
energie alternative, chilometraggio, riduzione degli spostamenti, minimizzazione dei consumi)
Sviluppo sociale e ripensamento (cambiamento sociale, car pooling,
Car sharing, proposta di valore), trasporti alternativi (parcheggio biciclette))
Misure (misure tecniche e logistiche (promozione dei trasporti pubblici,
Circonvallazioni, divieti di circolazione zonali, proporzione del tipo di carburante), misure legali
(Kyoto, velocità massima, prezzo del petrolio, costi di trasporto))
Fattore traffico (progresso tecnologico, sviluppo sociale e ripensamento,
Le misure)
Monossido di carbonio (naturale, antropico (fattore di traffico), altro (industria, ...))
Anidride carbonica (monossido di carbonio (ossidazione), naturale, antropico)
Riduzione dell'anidride carbonica (degrado naturale (foresta...), decadimento)
Successo nello scenario: "grüner Daumen/pollice verde (piantare alberi)"